Ambit Wireless USB Adapter Guía de usuario descargar pdf (Pagina 4)

1.5 LED Behavior Ubee Interactive

4 DDW2600 Wireless Cable Modem - FAQ • May, 2010

1.5 LED Behavior Use the following table to interpret the LED behavior of the device.

LED Description

Power (Green) On when device power plug is connected.

USB Host (Green) Flashes then Off during device initialization. On if a

USB device is connected to the cable modem.

Slow Flash if there is data traffic between the cable

modem and a USB device.

Sync (Green) On for normal operations. Slow Flash during initial

power-up of the cable modem.

Slow Flash if a device software/firmware upgrade in

progress.

Ready (Green) Flashes then Off during device initialization.

Slow Flash during upstream ranging and Fast Flash

during IP initialization and registration of the cable

modem to the cable network.

On if network access is enabled. Off if network

access is disabled/unavailable.

WLAN (Green) On during initialization of the device and if the

wireless radio and network are available. Off if the

wireless radio and network are unavailable/not

working.

Slow Flash if wireless traffic is being passed

between the cable modem and wireless client.

Eth 1 to Eth 4

(Green)

Flash then Off during device initialization. On, if

connected at 100Mbps or 10Mbps.

Slow Flash if traffic being passed between cable

modem and connected Ethernet device.

1 2 3 4 5 6 7 8

Sin comentarios

Ambit Wireless USB Adapter Guía de usuario Pagina 4